Have you tried everything to get your Vizio smart TV to turn on with no luck? But Vizio Smart TV That Won’t Turn On? Don’t worry, we’ve got you covered. Sometimes these advanced TVs with built-in streaming and smart features can be finicky, but there are a few quick things you can try before calling in the pros. Most issues are easy fixes if you know where to look. So grab your remote and let’s troubleshoot why your Vizio TV won’t turn on. We’ll bring you back to bingewatch your favourite shows and stream the latest movies in a matter of moments, thanks to some patience.
Common Causes of a Vizio TV Not Turning On
If your Vizio TV won’t turn on, don’t panic! There are a few common culprits that are usually easy fixes.
Power source issues
Firstly, make sure that your TV is switched on properly . An unplugged or loose power cable is an easy thing to miss. If it’s plugged in but still not turning on, try a different outlet to rule out a problem with the wall socket.
Remote problems
Next, check that your remote has working batteries. Dead batteries are a frequent reason for a TV not powering on. If the batteries are fine, try powering on your TV using the buttons on the TV itself. If that works, you likely need to re-pair or replace your remote.
Sleep timer
It’s also possible your TV’s sleep timer setting turned the TV off. Try pressing the power or input button on the TV itself to disable the sleep timer.
Software problems
Finally, there could be an issue with your TV’s software or firmware. Try unplugging the TV for 10-15 minutes to allow it to fully reset. The TV should be automatically turned on and running the most recent firmware while you plug it back in. You may need to restart the TV or have a technician service it if it’s still not responding. With some patience and troubleshooting, there’s a decent opportunity you can restore your Vizio television.
But if all else fails, make sure to Vizio’s help for additional assistance. They can walk you through more advanced steps or arrange a repair if needed. The most important thing is getting you back to binge-watching your favorite shows!
Checking the Power Cord and Outlets
The first thing to check is if your Vizio TV’s power cord is properly plugged in. Make sure both ends of the cord are firmly connected – to the TV and the wall outlet. If it looks OK, try plugging something else into the same outlet to ensure there’s power.
If the outlet is working, the issue could be with the power cord itself. Try wiggling the cord while it’s plugged in to see if your TV turns back on. If that does the trick, it’s best to replace the cord. You can find a replacement on Vizio’s website or at an electronics store.
Another thing to try is plugging your TV into a different outlet, preferably on another wall. If it still won’t turn on, the problem probably lies within the TV. At this point, you’ll want to check if your TV is still under warranty. If so, contact Vizio support to have a technician examine and repair the TV.
If the warranty has expired, you have a couple of choices. You can hire a TV repair technician to analyze and fix the issue. Or, if you’re tech-savvy, you can open up the television yourself to check for any loose connections or damaged components before deciding if it’s worth repairing or replacing. But be very careful, as CRT TVs in particular contain potentially hazardous voltages.
Whatever route you choose, with some patience and troubleshooting you can get your Vizio TV powered on again. Don’t give up hope yet – there are solutions and help is out there!
Inspecting the Vizio TV’s Power Button
If your Vizio smart TV won’t turn on, the power button is one of the first things to inspect.
- Make sure the power cable is plugged securely into both the wall outlet and the TV. An loose or faulty power cable is a common cause of TVs not turning on.
- Check if the power button on your Vizio TV is stuck or jammed. To check if it’s stuck, push the power button 10 to 15 seconds. You may need to replace the button if it does. You can do this yourself by purchasing a replacement power button board, or have a TV repair technician handle the replacement.
- The power button board, which the physical power button is attached to, could also have issues. If the power button seems to be functioning properly but the TV still won’t turn on, the board may need replacement. Again, you can purchase a replacement part yourself to install or have a professional handle it.
- As a last resort, the problem could lie within the TV’s internal power supply board. If all else checks out, this is likely the culprit preventing your Vizio from turning on. Unfortunately, power supply boards are not easy to replace yourself and will require soldering – it’s best left to a TV technician to diagnose and repair or replace the faulty power supply board.
In many cases, a Vizio TV that won’t turn on can be repaired yourself by ordering replacement parts. However, if the issue ends up being the power supply board or a more complex component, professional repair or replacement of the TV may be needed.
Don’t give up hope yet – start with inspecting the simpler fixes like the power cable, power button and button board first. With some patience and troubleshooting, you may be able to get your Vizio TV turning on again.
Trying a Factory Reset on the Vizio Smart TV
The easiest first step to try with a Vizio smart TV that won’t turn on is performing a factory reset. This will reset your TV back to the default factory settings and may resolve any software issues preventing the TV from powering on.
Follow the following steps to perform the factory reset of the Vizio Smart TV:
- Disconnect the power cable from the TV’s back at a minimum of two minutes. This will reset the TV and discharge any static electricity in the system.
- Locate the factory reset button on your Vizio TV. This is typically a small pinhole button located on the TV’s back panel, though the location can differ between models. You may need to consult your TV’s manual for the exact position.
- Press and hold the factory reset button using a paper clip or pin for at least 10-15 seconds.
- Release the factory reset button, plug the TV’s power cable back in and turn on your TV.
The TV should now display the initial setup menu that appeared when you first purchased the TV. Follow the on-screen prompts to set up your TV again. This includes selecting a display language, configuring the tuner, scanning for channels, connecting to the internet and inputting payment info for any streaming services.
Once setup is complete, your Vizio TV should now turn on and function normally. Performing a hard reset often fixes software glitches and resolves issues with the TV not responding or powering on.
However, if the problem continues after a factory reset, it’s best to contact Vizio support for further help or potential repair options. They can run diagnostics to determine if there are any hardware failures or defects with your specific TV model.
When to Call Vizio Support for a TV That Won’t Turn On
At some point, you may encounter issues with your Vizio smart TV that you can’t resolve on your own. When your TV won’t turn on at all, it’s best to contact Vizio’s customer support for help. Here are some situations where you’ll want to give them a call:
Power Light Doesn’t Come On
If you press a button on your remote or TV, it won’t work and doesn’t light up. That indicates that the power supply or circuit board is defective. You will not be able to fix yourself, so please contact Vizio’s support team for further troubleshooting and possible repair.
TV Was Working Fine but Now Won’t Turn On
If your TV was functioning properly but now won’t turn on at all, it could indicate an internal component failure. There are many possible culprits, like:
- The power supply board
- The main board (controls most of the TV’s functions)
- The backlight board or LED strips (provide screen illumination)
Vizio’s customer service should be able to run some tests to determine the source of the problem. They can then guide you through potential fixes or schedule a repair if needed.
Tried Basic Troubleshooting Steps with No Luck
You’ve tried all the usual troubleshooting tricks like:
- Checking connections
- Rebooting or doing a hard reset
- Trying different outlets
- Checking for damage to the power cable
But it’s still not turning on your TV. It’s best if the experts look at it right now.
Vizio’s support staff are trained to solve issues like this and can get your TV up and running again.
Don’t hesitate to contact Vizio if your TV won’t turn on. Their customer service aims to resolve problems efficiently while delivering a great experience.
Describe your issue in detail, have your TV’s model number ready, and be prepared to answer questions about the steps you’ve already tried. With their help, you’ll be back to streaming your favorite shows or movies in no time!
FAQs
One of the most common issues with Vizio smart TVs is when the power seems to be on but the screen remains black. Here are some frequently asked questions and solutions to try:
1. Did you try turning it off and back on again?
As silly as this sounds, simply power cycling your TV can fix many minor issues. Unplug the power cable from the back of the TV for at least 30 seconds to reset everything. Plug it back in and try turning on your TV.
- If that doesn’t work, try pressing and holding the power button on the TV itself (not the remote) for 10-15 seconds. Release and the TV should power on.
2. Are the indicator lights on?
Look for a solid or blinking red, blue or orange light somewhere on the front or side of the TV. A lit up light means the TV is getting power but there may be another issue preventing the screen from turning on.
- A blinking light sequence can indicate an internal error code. Check the light sequence against the error code list in your TV’s manual to diagnose the specific problem. You may need service to resolve some issues indicated by the error codes.
3. Have you checked all connections?
Make sure the power cable is securely plugged into both the wall outlet and the TV. Also ensure any HDMI cables, antenna or cable inputs, etc. are properly connected to the correct input/output ports. A loose connection could prevent the TV from powering on or displaying an image.
4. Is the remote working properly?
Try pressing the power button on your Vizio TV remote to rule out any issues with the remote control itself. If the remote isn’t working, you’ll need to use the power button on the TV to turn it on and off. You may need to replace the remote or batteries.
- As a last resort, you can do a hard reset of your Vizio smart TV to factory settings which may resolve any software issues preventing it from turning on. You will lose your settings and preferences, so only do this if other steps haven’t worked and you’ve backed up anything important. Refer to your TV’s manual for the steps to perform a hard reset.
Conclusion
Well that’s it, a couple of thingsto try if your Vizio smart TV won’t turn on. Don’t lose hope with some patience and troubleshooting you’ll likely be able to get your TV up and running again. Start with the simple stuff like checking your connections and power cycling, then move on to the more technical fixes if needed. Worst case you may need to do a factory reset to restore your TV to like-new condition. But try not to stress, Vizios are typically very reliable and with some TLC you’ll be back to streaming your favorite shows and movies in no time. Keep at it and happy viewing!